Care, inspection and maintenance
Inspection and maintenance
Inspection and maintenance of your
heating system is prescribed by the
Energy Savings Order and the
standards DIN 1988 8 or local
regulations.
Regular servicing of the heating
system will ensure trouble−free,
energy−conscious and
environmentally friendly heating.
Energy saving tips
Not only will you benefit from the advantages of a modern heating system,
but you can also save energy by the way you operate your system.
The following steps will help you:
Repair/energy saving tips
We strongly advise you to arrange
an inspection and service contract
with your local specialist.
Cleaning
All devices may be cleaned with a
commercially available domestic
cleaning agent (non−scouring).
H correct ventilation:
Window 1 briefly open fully and
close thermostatic radiator
valves 2
H do not overheat:
endeavour to reach a room
temperature of 20 ºC; every degree
of room temperature less saves up
to 6% of your heating bills.
H Close roller shutters (where
installed) at dusk.
H Set thermostatic radiator valves 2
correctly.
H Do not cover radiators 3 or
thermostatic radiator valves 2
H Utilise the setting options offered by
control unit 4:
e.g. "Normal temperature"
alternating with "Reduced
temperature".
H Set the DHW temperature in DHW
cylinder 5.
H controls the DHW consumption:
A shower generally uses less
energy than a full bath.
39