1. Manuals
  2. Brands
  3. RED ROOSTER Manuals
  4. Chain Hoists
  5. TCS-500-AT2S
  6. User manual

RED ROOSTER TCS-500-AT2S User Manual

Air hoist & trolley
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
AIR HOIST & TROLLEY
USER MANUAL
MODEL - TCS-500-AT2S

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TCS-500-AT2S and is the answer not in the manual?

Questions and answers

Related Manuals for RED ROOSTER TCS-500-AT2S

Summary of Contents for RED ROOSTER TCS-500-AT2S

  • Page 1 AIR HOIST & TROLLEY USER MANUAL MODEL - TCS-500-AT2S...

  • Page 3: Table Of Contents

    SECTION 13: DATA SHEET SECTION 14: DRAWINGS AND PARTS LISTS SECTION 15: ACCESSORIES SECTION 16: LOG BOOK M01-AH12-AT REV1 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪...
  • Page 4 CAUTION Failure to follow this instruction may result in premature wear of the hoist or a component part of the hoist M01-AH12-AT REV1 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101...

  • Page 5: Unpacking & Specification

    ‘responsible person’ for safe keeping. Check that the identifying mark (serial number), the Safe Working Load (Rated Load) and that the UKCA or CE marking appears on the hoist or hoist and trolley. SUPPLIER / MANUFACTURER Red Rooster Lifting Ltd Red Rooster Lifting Ltd ADDRESS...

  • Page 6: Operation

    OPERATION Red Rooster pneumatic hoists and trolleys are designed for the lifting and lowering of loads within the capacity of the model selected. The range of hoists and trolleys can be UKCA, or CE marked and conform with ‘Supply of Machinery (Safety) Regulations 2008 (As they apply to machinery being supplied in or into Great Britain from 1st January 2021) for UKCA marking and also the Machinery Directive 2006/42/EC for CE marking.

  • Page 7: Checks Before Use & Hose Support Bracket

    Thoroughly examine the equipment prior to installation to ensure that no damage has occurred during transit. Hoists and trolleys should not be altered in any way without contacting Red Rooster for clearance, as this may affect the certification of the unit.
  • Page 8 The contents of this section are designed for the guidance of personnel using push or geared trolleys. ▪ Ensure that the trolley is set to the correct size for the beam. ▪ Ensure the runway is fitted with adequate end stops. ▪ Ensure the runway load path is clear of obstructions. ▪ Ensure that the trolley tie bars are correctly secured. M01-AH12-AT REV1 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪...

  • Page 9: Technical Characteristics

    When the emergency stop button is pushed or if the air supply to the hoist is cut off then the valve will close stopping the hoist. ▪ Red Rooster hoists have a 5:1 factor of safety. M01-AH12-AT REV1 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪...

  • Page 10: Hoist Checks

    Load chain is undamaged and lubricated (light mineral oil). ▪ The load chain is not twisted through (two fall or more models) and that the load chain passed through the limit lever (All models). ▪ The load chain anchor is sound (both live and slack end). ▪ Check for damage to the hoist, pendant and control lines. ▪ Do not operated below -10°C or above 70°C without contacting Red Rooster. (The hoist can be used down to -20ºC with small modifications) HOIST CHECKS (AIR SUPPLY ON) ▪ The pendant buttons, levers or cords should be smooth to operate and return to neutral when released (hoist stops and does not run on). ▪ The hoist is run up and down on a regular basis. Where hoists are hanging in a dry and protected area they should be run weekly, where the hoist is outside and not protected it should be checked, lubricated and run daily.

  • Page 11: Hoist Controls

    ALMOST in the vertical position. When the load is applied, the tension in the sling will be slack. Trolley Resolution: When a hoist and trolley are fitted with heavy chain or a long drop, a second push trolley can be used in the same way to support the weight. THE SLING IS NOT CAPABLE OF HOLDING THE LOADS CARRIED BY THE HOIST M01-AH12-AT REV1 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪...
  • Page 12 USER MANUAL GETTING STARTED M01-AH12-AT REV1 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪...
  • Page 13 USER MANUAL GETTING STARTED M01-AH12-AT REV1 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪...

  • Page 14: Installing The Hoist & Trolley

    Mount hoist to trolley and temporarily install on beam to determine exact distribution of spacers to centre the top eye. After installation, operate trolley over entire length of beam with a capacity load suspended 10 to 15cm off the floor. M01-AH12-AT REV1 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪...
  • Page 15 PLAIN SIDE PLATE MOTOR SIDE PLATE ASSEMBLY ASSEMBLY M01-AH12-AT REV1 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪...
  • Page 16 Then tighten the nut against the roller and side plate and re-check the wheel setting. M01-AH12-AT REV1 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪...
  • Page 17 1.9 ▪ The LHR and ULHR trolley should only be used on straight runway beams. Special units are available for curved beams designed to suit the radius. ▪ LHR and ULHR trolleys are usually designed for a set beam size but can be made adjustable if required. ▪ LHR and ULHR units are available as standard or UK Ex / ATEX versions and with our in-house design team special units can be manufactured to suit your requirements. ▪ LHR units are also available as articulated units or with rack and pinion drive or beam brake. M01-AH12-AT REV1 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪...
  • Page 18 1TE Rack & Pinion Hoist 26/02/2014 ASSEMBLY AND INSTALLATION - BEAM BRAKE TROLLEY Replaces draw red rooster Designed by T. Mikolajewski Red Rooster Industrial (UK) Ltd, Nauta House, The Meadows, Checked by S. Przygoda Oldmeldrum, Aberdeenshire, AB51 0EZ Revision number Tel: +44(0)1651 872101...
  • Page 19 ▪ Next with the SWL of the hoist and trolley run the trolley along the runway beam checking movement around any curved sections and over joints. M01-AH12-AT REV1 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪...

  • Page 20: Lubrication

    (standard grease) during monthly or annual inspection. Temperature range of standard grease is -10ºC to +50ºC. If the trolley is used at temperature below -10ºC or above +50ºC, consult Red Rooster since come parts shall be changed. Note 4 Trolley wheel bearings do not need to be lubricated and must be replaced if worn or damaged.
  • Page 21 ▪ Only use the hoist to make a lift safe when a warning alarm has been activated in the area and then isolate the hoist. ▪ With trolleys less than 5 tonne SWL the weight of the hose may cause side loading of the trolley and could cause the wheels to come off the beam so the hose should be supported at the beam height to prevent loading the trolley, air set or fittings. AT ALL TIMES THINK BEFORE YOU ACT - PLAN EVERY LIFT M01-AH12-AT REV1 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪...
  • Page 22 Fig. A Fig. B Fig. C Fig. D Fig. E Fig. F Fig. G Fig. H M01-AH12-AT REV1 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪...

  • Page 23: Safe Operation

    If another hoist cannot be used to lower the load it is possible to release the brake by slackening the brake cover screws but this should only be done by a RRL engineer or after discussions with Red Rooster as it is not always possible or safe to do so.

  • Page 24: Maintenance

    It is recommended that the load chain and linkages are lubricated as part of this inspection routine. When repairing Red Rooster air hoists only original Red Rooster products should be used. Only minor repairs such as silencers, safety catches, pendant repairs, replacing shorter lengths of load chain and inspections should be done...

  • Page 25: Trolley Vane Motor Maintenance

    On V4 motors the rear bearing cover and its o-ring can now be fitted. Fig. 6 M01-AH12-AT REV1 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101...

  • Page 26: Silencing

    Before carrying out any work on the hoist the main air supply should be turned off and the residual air vented or the hoist run to dissipate the air pressure. Red Rooster hoists normally do not require any adjustment as the brake springs take up any wear and the load limiter and limits should not need adjustment once set. The lubricator should be checked and topped up weekly in normal use or daily when heavily used.

  • Page 27: Changing Trolley Silencers

    Otherwise the chain will become trapped DANGER and damaged. Only use quality load chain approved by Red Rooster for use on our hoists. DANGER ITEM...

  • Page 28: Types Of Chain

    EMERGENCY LOWERING In the event of a main air supply failure Red Rooster pneumatic hoists will stop hoisting or lowering and the springs on the disc brake will automatically close the brake holding the load in position.
  • Page 29 End Stopper Gear Box Chain Lever Hook Safety Latch Lower Hook Cord Lever Cord Control Pendant Control M01-AH12-AT REV1 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪...

  • Page 30: Service Data

    If the pin is replaced, replace the needle bearing and star gear at the same time. Wheel Replace if load-sheave part is badly damaged or worn. M01-AH12-AT REV1 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪...
  • Page 31 Also replace if the link chain is severely damaged. Load Chain 5 links L Measure the chain diameter (d) with point caliper. M01-AH12-AT REV1 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪...

  • Page 32: Laying Up The Hoist

    Store in a dry ventilated area. ▪ Secure hoist in a crate or suitable pallet. Transportation - Moving your Red Rooster hoist between locations. Carefully disconnect from suspension point and lower under control to ground level. Be sure that chain collector, valves and trolley drives are not damaged. Carefully lay the pendant on top of the hoist making sure tubes or hoses are not damaged.

  • Page 33: Chain Collectors

    ▪ When the load chain is dry it may not run freely into the chain collector and over fill the collector, so the chain must be kept lubricated to prevent it running out of the collector. ▪ Make sure the chain collector brackets have not been damaged during installation. ▪ Make sure the chain collector is free to move when the hoist is loaded and un-loaded. ▪ Make sure the bottom hook does not connect with the chain collector. Limit the lifting height of the bottom hook if necessary. ▪ For any assistance required on chain collectors please contact Red Rooster Lifting Ltd. M01-AH12-AT REV1 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪...
  • Page 34 USER MANUAL CHAIN COLLECTORS TCS-500 TCS-500 M8 x 65 M6 x 25 Chain Bag M01-AH12-AT REV1 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪...
  • Page 35 NOTE: The speed adjustment mechanism is set at the highest speed when shipped from the factory. Adjust screw lowering speed Adjust screw lifting speed Highest speed setting Lowest speed setting M01-AH12-AT REV1 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪...

  • Page 36: Operational Breakdown / Troubleshooting The Tcr & Tcs Hoist

    Trolley adjustment Adjust spacers and tie bars Obstruction on beam Remove obstruction Hose festoon jammed Adjust/repair festoon M01-AH12-AT REV1 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪...

  • Page 37: Periodic Examination & Testing

    SIX MONTHLY OFFSHORE INSPECTION Arrange to have the hoist examined by a person specifically trained and experienced in the examination of lifting machines. This can be done by a Red Rooster engineer or an independent competent person. Ensure that the party is operating to a detailed inspection procedure or code of practice. SERVICE We would recommend the hoist is returned every 5 years for a full inspection and service.

  • Page 38: Duty Ratings

    Load chain must be to manufacturer’s specification. Special chains are excluded (consult your supplier). Mode of use must be in accordance with manufacturer’s recommendation. M01-AH12-AT REV1 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101...

  • Page 39: Explosion Protection

    For Europe and many other parts of the world we also offer ATEX Non-electrical equipment certified under the ATEX 2014/34/EU Directive. For both the UK Ex and ATEX this is split into two categories of equipment available from Red Rooster – Group – I mining (I M2 De-energised in an emergency) and group II – Zone 1 + 21 & Zones 2 + 22) The Explosive Protection Level (EPL) has been set when the effective ignition sources are identified and when they become effective in normal operation and in the case of expected malfunctions.
  • Page 40 *Red Rooster hoists should only be operated with compressed air. MINING APPLICATIONS In general most standard Red Rooster hoists can be used for underground mining operations along with the surface buildings and services. The equipment is certified for Group I M2 use, so must be switched off / isolated in the event of an emergency. The equipment has to be robust, non- sparking, taking into account the conditions and the handling underground and be built to survive along with explosive protection from Methane gas / dust - Firedamp. The maximum surface temperature of 150°C for coal dust atmospheres will not be reached where a coal dust layer can be...

  • Page 41: Technical Specification

    0.25 to 2 Tonne 1.5 m 3 to 12 Tonne 2.5 m 15 to 25 Tonne 3.0 m M01-AH12-AT REV1 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪...
  • Page 42 RA IS IN G EX P ECTATI ONS TCS-500-AT2S is a 500 kg high speed chain hoist and trolley from Red Rooster Lifting. This is part of our air hoist and trolley range for lifting equipment applications in industry. Red Rooster Lifting...
  • Page 43 MAX AIR CONSUMPTION 25 l/sec sales@redroosterlifting.com HOSE ID TROLLEY 1/2" REDROOSTERLIFTING.COM Red Rooster Lifting Limited Nauta House, The Meadows, Oldmeldrum, Inverurie, Aberdeenshire, UK, AB51 0EZ M01-AH12-AT REV1 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪...
  • Page 44 USER MANUAL M01-AH12-AT REV1 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪...
  • Page 45 USER MANUAL DRAWINGS AND PARTS LISTS M01-AH12-AT REV1 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪...
  • Page 46 D01-AH12-AT REV3 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪...
  • Page 47 D01-AH12-AT REV3 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪...
  • Page 48 D01-AH12-AT REV3 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪...
  • Page 49 Brake Gears Suspension Body - TCS-500-AT2S 17.09.15 D01-AH12-AT REV3 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪...
  • Page 50 Brake Gears Suspension Body - TCS-500-AT2S 17.09.15 Fig. Part Number Part Name Parts Fig. Part Number Part Name Parts Hoist Hoist 426230A00 CENTRE HOUSING 426230931 SWIVEL HOOK 426230A50 LOAD SHEAVE 420645P11 HOOK SAFETY CLAW 426230200 COUPLING 131704028 HEX SOCKET HEAD CAP SCREW M4X28...
  • Page 51 Motor Valve Body - TCS-500-AT2S (Pendant) 17.09.15 D01-AH12-AT REV3 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪...
  • Page 52 Motor Valve Body - TCS-500-AT2S (Pendant) 17.09.15 Fig. Part Number Part Name Parts Fig. Part Number Part Name Parts Hoist Hoist 420215VB0 THROTTLE VALVE 131706020 HEX SOCKET HEAD CAP SCREW M6X20 426230E90 VALVE BUSHING (U) 131708110 HEX SOCKET HEAD CAP SCREW M8X110...
  • Page 53 Pendant - VRD-4R D01-AH12-AT REV3 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪ D01-P8 REV0 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪...
  • Page 54 1/4 HOSE FERRULE STRAINER WIRE 1/4-HOSE 1/4 ANTI STATIC RUBBER HOSE D01-AH12-AT REV3 D01-P8 REV0 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪ ▪ Red Rooster Lifting Limited ▪...
  • Page 55 USER MANUAL M01-AH12-AT REV1 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪...
  • Page 56 4 3/8” 0 NPT VALVE SIZE TYPE SIZE TYPE C7M 1/4” 4 Four-Way 4 3/8” 0 NPT M01-AH12-AT REV1 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪...
  • Page 57 4 3/8” 0 NPT VALVE SIZE TYPE SIZE TYPE C7M 1/4” 4 Four-Way 4 3/8” 0 NPT M01-AH12-AT REV1 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪...
  • Page 58 DIMENSIONS USER MANUAL CJJ-4313 CJJ-4503 Part No.:CJJ-4313 - 02/03/2012. visit http;//www.versa-valves.com/dlegal.html for terms on using this document. M01-AH12-AT REV1 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪...
  • Page 59 USER MANUAL M01-AH12-AT REV1 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪...
  • Page 61 USER MANUAL ACCESSORIES M01-AH12-AT REV1 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪...
  • Page 62 The noise level is also reduced by the silencer and also with the exhaust noise. Temperature range 5°C to 60°C. The exhaust hose and filter should be at least one size larger than the incoming air supply hose. The exhaust cleaner must be mounted vertically. If the oil drop level decreases or after a period of 1 year the filter element. M01-AH12-AT REV1 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪...
  • Page 63 USER MANUAL ACCESSORIES M01-AH12-AT REV1 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪...
  • Page 64 USER MANUAL AIR SERVICE EQUIPMENT An air set should be used with all Red Rooster hoists and trolleys. AIR SERVICE UNITS: The correct size of air service unit for each hoist type is stated in the table on page 4. The air service unit must be installed with the lubricator unit down line from the filter unit. The unit should be installed at the hoist inlet port or within eight metres of inlet port. (Siting the unit further away or...
  • Page 65 When the bowl is installed, install them so that the lock button lines up to the groove of the front (or the back) of the body to avoid dropping or damage of the bowl. Orange mark Lock button Image for illustration purposes only M01-AH12-AT REV1 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪...
  • Page 67 LOG BOOK LOG BOOK M01-AH12-AT REV1 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪...
  • Page 68 Check the condition and setting of the anti-tip rollers. Check air supply lines and control lines for fitting, wear or damage. Check load chain for excessive corrosion. Check hoist body for excessive corrosion. M01-AH12-AT REV1 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪...
  • Page 69 TROLLEY CHAIN: Check geared trolley hand chain and drive. When detecting any abnormality during inspection due to erroneous use, instruct the operator and user for correct use of the chain hoist. M01-AH12-AT REV1 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪...
  • Page 70 LOG BOOK M01-AH12-AT REV1 ▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪...
  • Page 71 TO BE CARRIED OUT MONTHLY IN PRODUCTION OPERATIONS WHERE HEAVILY USED OR IN HARSH WORKING CONDITIONS. TO BE CARRIED OUT THREE MONTHLY WHEN THE HOIST IS ONLY USED OCCASIONALLY. PLEASE CONTACT RED ROOSTER TO CONFIRM IF MONTHLY OR THREE MONTHLY MAINTENANCE CHECKS ARE REQUIRED IF YOU ARE NOT SURE.
  • Page 72 Head Office: +44 (0) 1651 872101 Nauta House Oldmeldrum E: sales@redroosterlifting.com The Meadows Aberdeenshire, AB51 0EZ W: www.redroosterlifting.com Depot: Unit 26 Kelvin Way +44 (0) 121 525 4162 Kelvin Way Trading Estate West Bromwich, B70 7TW...

Table of Contents