Table of Contents
Advertisement
TROUBLESHOOTING (cont.) / 疑难解答（续）
Clean Functions
Phenomenon
5. Low spray
water pressure.
6. Water stops
spraying from
the nozzle before
wash finishes.
7. Water comes
out from the hole
beside the nozzle
during spraying.
8. Water comes
out from the nozzle
when the product
is seated on.
Slow Seat Closure
Phenomenon
9. The speed
of the seat and
cover closure
varies in summer
and winter.
1349982-T01-A
Possible Causes
A. Filter is clogged.
B. Insufficient water supply
pressure.
A. Spray function auto stops
after continuous spraying for
5 min.
B. The seat-on sensor fails
to detect the user.
A. A protection method from
high pressure inside the
product.
A. Residual water in the
wand is auto-drained before
the user resumes using the
product after a long time.
Possible Causes
A. Due to changes in room
temperature.
Recommended Solution
A. Refer to "CLEAN FILTER"
section.
B. Raise water pressure into
the pressure range required
by the product.
A. If needed, press the spray
button again.
B. Check how to activate the
seat in the "INSTALLATION
INSPECTION" section of the
"Installation Guide."
A. Normal phenomenon.
A. Normal phenomenon.
Recommended Solution
A. Normal phenomenon.
22
Kohler Co.
Advertisement
Table of Contents
