Advertisement
FOREWORD
ii. While pressing lock (L2), pull out connector (1).
★ Lock (L2) is located in the back of connector (1).
B. Connection
i.
Insert the connector straight until it "clicks."
8.
Pull lock type (PACKARD-2)
•
95/107/114/125/140/170/12V140 Series
•
Various temperature sensors. Examples:
i.
Charge (boost) temperature sensor in the air intake manifold: TIM
ii. Fuel temperature sensor: TFUEL
iii. Oil temperature sensor: TOIL
iv. Coolant temperature sensor: TWTR and other.
A. Disconnection
i.
Disconnect the connector by pulling lock (B) (on the
wiring harness side) of connector (2) outward.
B. Connection
i.
Insert the connector straight in until it "clicks."
00-20
b
HANDLING ELECTRIC EQUIPMENT AND HYDRAULIC COMPONENTS
PC490LC-10
Advertisement
