Advertisement
FOREWORD
i.
Charge (boost) pressure sensor in the air intake manifold: PIM (125/170/12V140 series)
ii. Oil pressure sensor: POIL (125/170/12v140 series)
iii. Oil pressure switch (95/107/114 series)
iv. Ne speed sensor on flywheel housing: Ne (95/107/114/125/140/170/12v140 series)
v.
Ambient pressure sensor: PAMB (125/170/12V140 series)
A. Disconnection
i.
Slide lock (L1) to the right.
ii. While pressing lock (L2), pull out connector (1) toward you.
★ Even if lock (L2) is pressed, connector (1) cannot be pulled out
toward you, if part A does not float. In this case, float part A
with a small flat-head screwdriver while press lock (L2), and
then pull out connector (1) toward you.
B. Connection
i.
Insert the connector straight until it "clicks."
7.
Slide, lock type (Type 2) (FRAMATOME-24)
•
107/114/125 Series
•
Intermediate connector between machine wiring harness and engine wiring harness. Examples:
i.
Intermediate connector (engine wiring harness): OEM CONNECTION (107/114/125 series)
A. Disconnection
i.
Slide down lock (red) (L1).
PC490LC-10
HANDLING ELECTRIC EQUIPMENT AND HYDRAULIC COMPONENTS
00-19 b
Advertisement
