Table of Contents
Advertisement
Available languages
Available languages
Care and maintenance
Cleaning the filters
The filter assembly consists of three filters which remove food
residues from the washing water and then recirculate the water.
They must be cleaned if you wish to achieve the best results in
every wash.
Clean the filters regularly.
The dishwasher must not be used without filters or if the filter
is loose.
clean it thoroughly under running water, using a non-metallic
brush and following the instructions below:
1. Turn the cylindrical filter C in an anti-clockwise direction and
pull it out
2.
B
side flaps
3.
4. Inspect the trap and remove any food residues. NEVER
REMOVE the wash-cycle pump protection
in position correctly; this is essential for maintaining the efficient
operation of the dishwasher.
Leaving the machine unused for extended
periods
off the water tap.
empty.
*
Only available in selected models.
EN
A.
29
Advertisement
Table of Contents
