Loading The Racks - Hotpoint Ariston LTF 11P123 Operating Instructions Manual

Hide thumbs Also See for LTF 11P123:
Table of Contents

Advertisement

Available languages

Available languages

Loading the racks

Tips
EN
Before loading the racks, remove all food residues from the
crockery and empty liquids from glasses and containers. No
preventive rinsing is needed under running water.
Arrange the crockery so that it is held in place firmly and does
not tip over; and arrange the containers with the openings facing
thus allowing the water to reach every surface and flow freely.
Make sure that the lids, handles, trays and frying pans do not
prevent the spray arms from rotating. Place any small items in
the cutlery basket.
water drops, their drying will be not so good as that of ceramic
or stainless-steel dishes.
Lightweight items such as plastic containers should be placed in
the upper rack and arranged so that they cannot move.
After loading the appliance, make sure that the spray arms can
rotate freely.
Lower rack
The lower rack can hold pans, lids, dishes, salad bowls, cutlery
etc. Large plates and lids should ideally be placed at the sides.
a more vertical position, thus taking up less space.
In order to use it, just get hold of the coloured grip and pull it
upwards while rotating it forward. The supports can slide right
24
They can be used in a vertical position when arranging dishes
easily.
Upper rack
Load this rack with delicate and lightweight crockery such as
glasses, cups, saucers and shallow salad bowls.
dessert saucers or in a lower position to load bowls and food
Tip-up compartments with adjustable position
Very soiled dishes and
The side tip-up compartments can be positioned at three different
pans should be placed
in the lower rack because
in this sector the water
sprays are stronger and
allow a higher washing
models are equipped with
Vertical Zone, special
*
pull-out supports
in the
rear of the rack that can
be used to support frying
pans and baking pans in
*
positions.
Wine glasses can be placed safely in
the tip-up compartments by inserting
the stem of each glass into the
corresponding slot.
For optimum drying results incline
the tip-up compartments more. To
change the inclination, pull up the tip-
up compartment, slide it slightly and
position it as you wish.
Only available in selected models with different numbers and
*
.
*
.
*

Advertisement

Table of Contents
loading

Table of Contents