Representation Of The Map In Navigation Mode - Sony NV-U50 User Manual

Map alignment
Select destination
Zoom level, scale

Representation of the map in navigation mode

Assistance for
navigation
Working with the map
Align In driving direction or
align North
Tap on the In driving direction button to align the map in such
a way that the "straight ahead" direction of movement is always
"pointing up" on the screen.
This view is then only possible if you have fixed the position (see
above) and you are moving.
Tap on the North button to align the map in such a way that
north is always at the top.
This view corresponds with the view on printed maps, but it is not
practical for the navigation.
Select destination
Tap on this button in order to select the point in the centre of the
crosshair as a destination point for the navigation or for the route
planning. Refer to chapter "Indicating destinations on the map"
on page 38 for more information.
Zoom in
Zoom out
Tap on the Zoom in button to zoom in on the map. The map
section becomes smaller, but the detail increases.
Tap on the Zoom out button to zoom out on the map. The map
section becomes larger but the detail reduces.
The Zoom level bar displays the current zoom level.
The more white lines you see the smaller the scale.
During navigation the map opens in the S
Mode 2D/3D, Autozoom and Alignment, the settings that
have been established in the A
Refer to chapter "Auto mode" on page 87 for more information.
Various types of information useful for the journey will be
displayed during navigation.
User's manual Sony Personal Navigation System
TANDARD
screen will be used.
UTO MODE
view. For the
- 69 -