Table of Contents
Advertisement
3. Quick start
This section is intended to help users to quickly plug the module into their
system and establish a connection between the computer used for the initial
configuration and the card. Detailed information about hardware and
software can be found further in this document.
You can find the board factory communication settings on the label that is
found on the board and on the box.
The MAC Address is the 48bits unique identifier on Ethernet networks. The
IP Address can be modified. The complete procedure is described further in
this manual.
Note: If the module has already been configured and the IP address has been
changed to an unknown value, you can retrieve an SOS IP address (on label) by
pressing the "SOS button" when the card is operating normally.
FMOD-IPAXESCTRL
INPUT(supply) : 7-48V DC, 1.5 W
MAC: 00-50-C2-30-8x-xx / IP : 169.254.5.1
This device is not intended to be used in a medical, life-support or space product. Any failure
of this device that may cause serious consequences should be prevented by implementation
of backup systems. The user agrees that protection against consequences resulting from
device system failure is the user's responsibility. motion@fiveco.com / www.fiveco.com
9 / 70
FMod-IPAXESCTRL User Manual v.1.5
Advertisement
Table of Contents
