Quick Start - FiveCo FMod-IPAXESCTRL User Manual

3. Quick start

Note: If the module has already been configured and the IP address has
This section is intended to help users to quickly plug the
module into their system and establish a connection between
the computer used for the initial configuration and the card.
Detailed information about hardware and software is
described further in this document.
You can find the board factory communication settings on the
label on the board or on the box.
FMOD-IPAXESCTRL
INPUT(supply) : 7-48V DC, 1.5 W
MAC: 00-50-C2-30-8x-xx / IP : 169.254.5.1
This device is not intended to be used in a medical, life-support or space product. Any failure
of this device that may cause serious consequences should be prevented by implementation
of backup systems. The user agrees that protection against consequences resulting from
device system failure is the user's responsibility. motion@fiveco.com / www.fiveco.com
The MAC Address is the 48bits unique identifier on Ethernet
networks. The IP Address can be modified. The complete
procedure is described further in this manual.
been changed to an unknown value, you can retrieve back an SOS
IP address (on label) by pressing the "SOS button" during the
normal operation of the card.
10 / 71
FMod-IPAXESCTRL User Manual v.1.1