Table of Contents
Advertisement
V. USAGE INSTRUCTION
MANUAL RESET
It is necessary to be reset manually after the initial installation and power switched off.
1.
Press down key until the display shows "E-1" and "RES" alternately then release the key.
2.
Press down key again, the desktop will move slowly down and return until the display
shows "70 (27.6") /60 (23.7")".
3.
Release the key.
NOTE: The anti-collision function is not enabled during all resets. Please note that there is a
potential risk of pinching in this case and be sure that the area is clear.
UP AND DOWN
1.
Press "up" key until the required height is reached.
2.
Press "down" key until the required height is reached.
USAGE INSTRUCTION |
11
Advertisement
Table of Contents
