Table of Contents
Advertisement
RESET TO FACTORY SETTING
With this function, you can make the control unit to factory setting.
S
1.
Press "S" until the display shows "FAC".
2.
Press "S" again to confirm.
CODE MEANING & TROUBLE SHOOTING
CODE
Information
Manual Resetting
RES
OVR
Overload
E-2
Anti-Collision Function Resume function after removing obstacle.
DUT
Too Frequent Operation
The Height Difference
E-4
between Two Legs
Exceed 1 Inch
E-3
Check the Connection
14
| USAGE INSTRUCTION
Operating
Refer to the progress of Manual Reset.
Remove the load on desktop until it is less than 1000N (220
lbs) before further operation
The desk needs to rest for 15minutes before further
operation.
The desk needs to rest for 15minutes before further
operation.
Check the cables and ensure they are well connected,
manual reset before re-use.
Advertisement
Table of Contents
