Message Alarm; Set A One-Time Message Alarm; Set Daily Message Alarm; Backlight - commtech wireless 7950 V2 User Manual

Message Alarm

This feature allows you to set a one-time or daily alarm for a selected personal message. You can set an alarm for up
to five personal messages. When a message alarm is set,
the alarm sounds,  is again displayed unless the alarm is set to alert daily. Press
which the alarm is set. If the alarm times passes without being acknowledged,

Set a One-time Message Alarm

1. From the Message-status screen, press
2. Press .
3. Press to move the cursor to
4. Press . The Set-message-alarm screen is displayed.
Example of Set-Message-Alarm screen:
The alarm symbol shows the current alarm status.
is displayed if the message alarm is disabled.
5. Press until
6. Press to move the cursor to the hour digits.
7. Press to adjust the hour digits.
8. Adjust the minutes, AM/PM/24, hour, and date.
9. Press to activate your selection.

Set Daily Message Alarm

1. Follow the steps in the previous section to set the message alarm time.
2. When setting the date, press
3. Press to activate your selection. The alarm is now set to alert every day at this specified time.

Backlight

You can manually turn the backlight on or off at any time by pressing and holding any key for two seconds. The
backlight automatically turns off when the pager returns to the Standby screen or when holding any key for two
seconds again.

Low Battery Indication

When the energy level of the battery is low, the battery icon changes from
periodically.
User Guide for 7950 V2
or
.
is displayed.
until you see double dashes for the month, day, and year (--/--/--).
replaces  in the Message-status screen. At the time
flashes until the message is read.
to choose the message you want to alarm.
is displayed if the message alarm is enabled, and
to
to display the message for
. An audio alert sounds
7950 V2 Pager  7