7
Inserting the needle
.03
Fig. 7 - 03
●
Activate the threading aid on the machine head by pressing the key.
●
Loosen screw
●
Insert the needle as far as possible. The long needle groove must be facing left.
●
Tighten screw
●
Switch off the threading aid on the machine head again by pressing the key.
1
1.
1.
Setting up
Only change the needle when
the threading aid is activated!
Danger of injury if the machine
suddenly starts running!
Only use needles from the sys-
tem intended for the machine,
see Chapter 3 Specifi cations!
19