Adding/Deleting Users & Supervisors - Logiquip QT CART User Manual

ADDING/DELETING USERS & SUPERVISORS
ADD USER
1 . Enter valid supervisor PIN code and press ENTER or present valid Supervisor card credential (if equipped)
2 . Press ADD USER
3 . Enter the new user PIN code (4 to 14 digits) or present new user cart credential
4 . Press ENTER
5 . Press LOCK/CLEAR
ADD SUPERVISOR
– It is recommended that the supervisor codes are at least one digit longer than the user codes.
1 . Enter valid supervisor PIN code and press ENTER or present valid Supervisor card credential (if equipped)
2 . Press ADD USER
3 . Enter the new user PIN code (4 to 14 digits) or present new user cart credential
4 . Press ENTER
5 . Press LOCK/CLEAR
DELETE USER
1 . Enter valid supervisor PIN code and press ENTER or present valid supervisor card credential (if equipped)
2 . Press and Hold ADD USER if the credential to be deleted is a User
3 . Press LOCK/CLEAR
4 . Release ADD USER
5 . Enter the PIN code to be deleted and press ENTER or present the card to be deleted
6 . Press LOCK/CLEAR
DELETE SUPERVISOR
1 . Enter valid supervisor PIN code and press ENTER or present valid supervisor card credential (if equipped)
2 . Press and Hold ADD SUPERVISOR if the credential to be deleted is a User
3 . Press LOCK/CLEAR
4 . Release ADD SUPERVISOR
5 . Enter the PIN code to be deleted and press ENTER or present the card to be deleted
6 . Press LOCK/CLEAR
4 |
USER GUIDE
(800) 665-3760