Specification - Panasonic KV-S2065L Service Manual

3. Use a conductive mat on the worktable.
4. Do not grasp IC or LSI pins with bare fingers.

2. SPECIFICATION

Item
Scanner Scanning face
Scanning method
Scanning speed
Resolution
Tonal gradation
Image control
Compression
Paper
Interface (Transfer rate) SCSI 3 (20MB/sec), 50pin
Unit External dimensions
(WidthxDepthxHeight)
Mass (Weight)
Power requirement
Power
consumption
Duplex scanning
Front side: CIS (Contact Type Image Sensor)
Back side: CIS (Contact Type Image Sensor)
Simplex scanning: Approx. 60 ppm (Letter, fed lengthwise, 200
Duplex scanning: Approx. 110 ipm (Letter, fed lengthwise, 200
Main scanning direction: 100-600 dpi (1 dpi step)
Sub-scanning direction: 100-600 dpi (1 dpi step) (Same as main
scanning direction)
Optical resolution is 400 dpi.
Binary mode, Grayscale mode (4/8 bit), 64-step gradation (dither)
mode, 64-step gradation (error diffusion) mode
Image emphasis, Dynamic threshold (DIMM required), Automatic
threshold, Automatic separation, Monochrome reversing, Automatic
back control
MH, MR, MMR
Size Scanning size: 48 x 70mm (1.9 x 2.75
in.) to 216 x 431mm (8.5 x 17 in.)
Feeding size: 48 x 70mm (1.9 x 2.75
in.) to 305 x 838mm (12 x 33 in.)
Thickness Single paper feeding: 0.025 to 0.2mm (1.0 to 7.9 mils)
Continuous paper feeding: 0.06 to 0.2mm (2.4 to 7.9 mils)
Note: 1 mil=1/1000 in.
Weight
Single paper feeding: 20 to 157g/m
Continuous paper feeding: 50 to 157g/m
495 x 575 x 246mm (19.5 x 22.6 x 9.7 in.)
19kg (41.8 lbs.)
AC100-120V, 50/60Hz
AC220-240V, 50/60Hz
Maximum 1.3A (AC100-120V)/98W
(Scanning)
0.8A (AC220-240V)/98W
Minimum 0.5A (AC100-120V)/30W
(Standby)
0.3A (AC220-240V)/30W
Sleep 0.13A (AC100-120V)/11W
mode
0.07A (AC220-240V)/11W
3
Model No.
KV-S2065L KV-S2065W
Scanning size: 48 x 70mm
x 2.75 in.) to 298 x 431mm
x 17 in.)
Feeding size: 48 x 70mm
2.75 in.) to 305 x 838mm
33 in.)
2 (5.3 to 42 lbs.)
(13 to 42 lbs.)
2