Signs And Symbols - Gerima SMT 30 AER-24.G1 Operating Manual

Table beveling machine
Table of Contents

Advertisement

Please read the manual before using machine !
This manual has been created so that you can
work with your device quickly and safely. Here is a
brief guide on how you should read this manual:
Read these operating instructions before
working with the machine. Note especially
the safety information.
This manual is intended for people with
basic technical knowledge in dealing with
devices like the one described here. If you
have no experience with such devices, you
should first obtain the assistance of experi-
enced person.
Keep all documentation delivered with the
device, so you can get information when
needed. Keep your receipt for any warranty
claims.
If you lend or sell the machine once please
give all equipment supplied documentation
with.
For damages which arises because these
operating instructions were not followed, the
manufacturer accepts no responsibility.
©

Signs and symbols

The information in this manual are indentified
as follows:
Danger!
Warning of person, machinery or
environmental damage.
Risk of electric shock!
Warning of damage caused by
electricity.
Entanglement!
Warning of personal damage by
detection of body parts or clothing.
Before this step, unplug the mains
plug from the power socket.
Otherwise there is a danger of
injury due to unintentional starting
the power tool.
Tip:
Additional information used to
improve the knowledge.
Ear protection!
Operating personnel must wear ear
protection.
Eye protection!
Operating personnel must wear eye
protection.
Hand protection!
The operator must wear protective
gloves.
Note that the substances / materials
used to handle properly and must
be disposed of according to
regulations and laws.
5

Advertisement

Table of Contents
loading

Related Products for Gerima SMT 30 AER-24.G1

This manual is also suitable for:

Smt 30 aer-14.g1

Table of Contents