Intended Use - Gerima SMT 30 AER-24.G1 Operating Manual

The table beveling machine SMT 30 AER-24.G1
and SMT 30 AER-14.G1 may only be used for
work and materials described in the section

‚intended use'.

Do not use the machine to work
on materials containing asbestos!
The SMT 30 AER-24.G1 and SMT 30 AER-14.G1
is a stationary, electrically powered beveling ma-
chine intended:
•
For machining workpieces made of steel,
cast steel, fine-grained steel, stainnless
steel, aluminium, aluminium alloy, brass
and plastic.
•
For commercial use in industrial settings
and in the skilled-trades.
•
For preparing K-, V-, X-, and Y-shaped
welding grooves.
•
For creating visible edges in plant and me-
chanical engineering work.
•
For rounding off of edges for an optimal
painting preperation or as a scratch and
bump protection.
©
Intended use
14