Accessing The Inner Parts; Access To The Inside Of The Unit On The Electrical Panel Side - Trane Picco R32-140 User& Installer's Manual

The ideal installation positions of the dampers for each type of machine are shown in the below images.
B
P1
P3
Models
Picco R32
140 / 250
260 / 270
Hydronic kit with tank
5.7 ACCESSING THE INNER PARTS
5.7.1 Access to the inside of the unit on the electrical panel side
In case of maintenance and/or inspection of the compressors, it is necessary to access the inside of the unit by opening the door, located
on the front side where the electrical panel is also located. To unlock it, it is necessary to unscrew the fixing screws using the appropriate
tool and pull it towards you using the handle located under the panel. Pay attention to the electrical panel which is bound to the door itself.
For access to the panel, see the relative chapter.
The operator must pay attention to the fins of the driver which protrude from the inside and can be sharp at the edges.
Pay particular attention to any slight differences in level that may cause the door to close unintentionally, with the risk of
crushing.
16
A
Version A [mm]
Standard 1410
2180
Picco R32
C
P2
P4
B [mm]
105
105
Inverter air/water heat pumps with axial fan
90
C [mm] D [mm]
235 32
80 32