Download  Print this page

Receiving A Station Through A List - List; Rds; Overview; Setting Af And Ta - Sony MEX-BT5100 Operating Instructions Manual

Bluetooth audio system.
Hide thumbs

Advertisement

Table of Contents
Tip
If you know the frequency of the station you want to
listen to, push and hold the joystick left/right to locate
the approximate frequency, then push the joystick left/
right to fine adjust to the desired frequency (manual
tuning).
Receiving a station through a list
— LIST
You can list up the frequency.
1
Select the band, then press the
joystick.
The frequency appears.
2
Push the joystick up/down until the
desired station appears.
3
Press the joystick to receive the
station.
The display returns to normal reception
mode.

RDS

Overview

FM stations with Radio Data System (RDS)
service send inaudible digital information along
with the regular radio programme signal.
Display items
Example: when you set Info (information) mode
to "All" (page 20).
A
D
A Radio band
B TA/TP/AF*
1
C Clock
D Preset number
E Frequency*
2
(Programme service name),
RDS data
*1 When Info (Information) "All" is set:
– "TP" lights up while "TP" is received.
– "TA"/"AF" lights up while "TA/AF" is on.
*2 While receiving the RDS station, " RDS" is
displayed on the left of the frequency indication.
B
C
E
RDS services
This unit automatically provides RDS services as
follows:
AF (Alternative Frequencies)
Selects and retunes the station with the
strongest signal in a network. By using this
function, you can continuously listen to the
same programme during a long-distance drive
without having to retune the same station
manually.
TA (Traffic Announcement)/TP (Traffic
Programme)
Provides current traffic information/
programmes. Any information/programme
received, will interrupt the currently selected
source.
PTY (Programme Types)
Displays the currently received programme
type. Also searches your selected programme
type.
CT (Clock Time)
The CT data from the RDS transmission sets
the clock.
Notes
• Depending on the country/region, not all RDS
functions may be available.
• RDS will not work if the signal strength is too weak,
or if the station you are tuned to is not transmitting
RDS data.

Setting AF and TA

1
Press (AF/TA) repeatedly until the
desired setting appears.
Select
To
AF on
activate AF and deactivate TA.
TA on
activate TA and deactivate AF.
AF/TA on
activate both AF and TA.
AF/TA off
deactivate both AF and TA.
Storing RDS stations with the AF and
TA setting
You can preset RDS stations along with the AF/
TA setting. If you use the BTM function, only
RDS stations are stored with the same AF/TA
setting.
If you preset manually, you can preset both RDS
and non-RDS stations with the AF/TA setting for
each.
1 Set AF/TA, then store the station with BTM or
manually.
continue to next page t
13

Advertisement

Chapters

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: