Main Visualization; Functions - CBE Avida PC220-KT User Manual

MAIN VISUALIZATIONS
1) It shows that the minimal voltage device is switched on.
2) It displays that the 240V battery charger is on.
3) It displays the batteries' paralleling when engine is on.
4) It indicates that the engine is on
Fresh water tank status display.
5)
6) "B2" leisure battery status display.
7) It shows the fresh water tank test, the blinking indicates the empty tank alarm.
8) It shows the leisure battery (B2) test, the blinking indicates the discharged battery alarm
9) It shows the waste water tank test, the blinking light indicates
10) It shows the car battery (B1) test, the blinking indicates the discharged battery alarm.
11) Digital display of the clock and of the required test.
12) It shows the unit of measure

FUNCTIONS

CHASSIS BATTERY ALARM (B1)
When the chassis battery voltage drops down to 12V, the Motor Battery Discharge alarm goes on and
the symbol ref. 10 starts blinking. Alarm goes off when the voltage gets over 12.5V.
CHASSIS BATTERY RECHARGE (B1)
With battery charger: an electronic device allows the recharge (max 2A) of chassis battery (B1).
Priority is given to leisure battery (B2) charge.
LEISURE BATTERY ALARM (B2)
When leisure battery voltage drops down to 11.5V the Leisure Battery Reserve alarm goes
automatically on, the symbol ref. 8 starts blinking and you hear a short beep.
When the leisure battery voltage drops down to 10.5V, the Leisure Battery Discharge alarm goes
GB
GB automatically on, the symbol ref. 8 starts blinking and you hear two short beeps. Alarms go off when
the voltage gets over 12.5V.
6
1
5
6
7 8 9
.
and display kind.
2 3 4
11
10
12
that the waste water tank is full