Features And Controls; Control Functions And Locations; Zero-Turn Rider Controls - Ferris ISX3300BVE37CE Operator's Manual

Features and Controls

Control Functions and Locations

The information below briefly describes the function of
individual controls. Starting, stopping, driving, and mowing
require the combined use of several controls applied in
specific sequences. To learn what combination and sequence
of controls to use for various tasks see the Operation section.

Zero-Turn Rider Controls

6
Callout
A Hydraulic Deck Lift Button
B Deck Lift Pedal
C Cut Height Adjustment Pin
D Deck Lift Lock Lever
E Deck Lift Lock Lever Lockout Plate
F Parking Brake Lever
G Seat Adjustment Lever
H Roll Bar
I Ground Speed Control Levers
J Retractable Seat Belt
K Fuel Selector Valve
L Fuel Tank Cap (One per fuel tank)
M Fuel Level Gauge (One per fuel tank)
N Removable Floor Plate
O Transmission Oil Fill (One per hydraulic tank)
P Hydraulic Actuators (One per transaxle)
14
Control Name
Deck Lift Pedal: The deck lift pedal (A, Figure 7) can be
depressed during operation to briefly raise the mower deck
while mowing around obstacles.
7
Hydraulic Lift Button, Cut Height Adjustment Pin & Deck
Lift Lock Lever: The hydraulic lift button (B), the cutting
height adjustment pin (C), and the deck lift lock lever (D) are
used together to control the cutting height of the mower deck.
See Cutting Height Adjustment for instructions on using these
controls.
) - Hydraulic Lift Button
(
) - Cutting Height Adjustment Pin
(
) - Storage Hole for Cutting Height Adjustment Pin
(
) - Deck Lift Lock Lever
(
Deck Lift Lock Lever Lockout Plate: The deck lift lock lever
lockout plate (E, Figure 7; A, Figure 8) can be used to prevent
the mower deck from locking the deck in the TRANSPORT
position if you raise the deck during operation to clear an
object.
ferrismowers.com