Hardware Installation - Ubiquiti UniFi US-XG-6POE Quick Start Manual

You can use the redundant DC power source as a hot spare; if there is no longer
power through the Power port, the UniFi Switch will switch to the DC power source
without interrupting its operation.
Connect the included Power Adapter to the Power port.
Ancillary grounding point for enhanced ESD protection.

Hardware Installation

The UniFi Switch can be mounted on a horizontal or vertical surface.
Grounding (Recommended)
The UniFi Switch is grounded through the Power Adapter; however, you can add
optional ESD grounding for enhanced ESD protection.
Create PDF in your applications with the Pdfcrowd
Note: Ensure the polarity is correct: red is positive (+) and black is negative
(-).
Power Port
Ground
WARNING: The US-XG-6POE must not be stacked. Do not place it on top of
another switch. Do not place anything on top of the US-XG-6POE.
Note: You also have the option to use the Cable Clip to secure the cord of the
Power Adapter. For instructions, proceed to
HTML to PDF API
"Using the Cable Clip (Optional)".
PDFCROWD