Hardware Installation - Ubiquiti US-16-XG Quick Start Manual

2022/09/02 0:05
RJ45 (Ports 13 - 16)
RJ45 ports support 1 Gbps and 10 Gbps Ethernet connections.
Click for
Reset Button
Table of Contents
This button serves two functions for the UniFi Switch:
Restart Press and release the Reset button quickly.
Restore to Factory Default Settings Press and hold the Reset button for
more than five seconds.
Console Port
Console Port
RJ45 serial console port for Command Line Interface (CLI) management. Use
an RJ45-to-DB9, serial console cable, also known as a rollover cable, to
connect the Console port to your computer. Then configure the following
settings as needed:
Baud rate 115200
Data bits 8
Parity NONE
Stop bits 1
Flow control NONE
DC Input
The 48/24VDC input can connect a redundant or stand-alone DC power
source (not included) with minimum power: 56W, 57 to 20V.
Note:
the internal AC/DC power supply no longer provides power, the UniFi
Switch will switch to the DC power source without interrupting its
operation.
Power Port
Connect the included Power Cord to the Power port.

Hardware Installation

https://dl.ui.com/qsg/US-16-XG/US-16-XG_EN.html
US-16-XG Quick Start Guide
×
You can use the redundant DC power source as a hot spare; if
US-16-XG Quick Start Guide
3/12