Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ICI DURACAM Series
Summary of Contents for ICI DURACAM Series
- Page 1 Edit Text Industry DURACAM/TOUGHCAM SERIES QUICK START GUIDE ICI cameras fall under US Federal Law and Export Control. 2105 W. Cardinal Dr. Beaumont, TX 77705 Phone: (409) 861-0788 Toll Free: (866) 861-0788 infraredcameras.com support@infraredcameras.com We Are IR ™...
- Page 2 IN NO EVENT SHALL ICI BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF ICI HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-
Page 3: Package Includes
Package Includes Cam device Micro-USB to USB Cable Power Cord Power Adapter ENSURE ALL SYSTEM EQUIPMENT AND COMPONENT ITEMS ARE PRESENT BEFORE BEGINNING INSTALLATION... - Page 4 Set Up The camera can be used as Mount the fully charged device handheld devices. to a tripod using the ¼”-20 mount located on the body. MAKE SURE TRIPODS DO NOT BLOCK THE DIRECT PATH OF PERSON(S) TO BE IMAGED TO ENSURE THE EQUIPMENT WILL NOT BE MOVED OR KNOCKED DOWN.
- Page 5 TURN ON THE CAMERA BY PUSHING AND HOLDING THE POWER BUTTON FOR THREE SECONDS. Power on device. PRESS AND HOLD THE POWER BUTTON FOR MORE THAN FIVE SECONDS TO SHUT DOWN THE CAMERA. AFTER POWERING OFF, WAIT TEN SECONDS BEFORE POWERING THE DEVICE ON AGAIN.
-
Page 6: Battery Installation
Battery Installation MAKE SURE TO HOLD THE CAMERA FIRMLY IN BOTH HANDS WHEN REMOVING OR REPLACING BATTERY OR OPENING THE BATTERY BAY COVER. Press and hold the battery bay Ensure metal contacts are aligned, button and lift upwards to open the then push battery into battery bay. -
Page 7: Memory Card
Memory Card Insert the MicroSD Card into the side of the DuraCam/ToughCam until a clicking sound is heard. DO NOT FORCE MICRO-SD CARD INTO THE SLOT. THE SIDE OF THE CARD WITH CONTACT PINS MUST BE INSERTED FIRST. IF THERE IS RESISTANCE FLIP THE CARD AROUND AND TRY AGAIN. TO EJECT THE MEMORY CARD PRESS UNTIL A CLICK IS HEARD AND THEN RELEASE. -
Page 8: Charging Instructions
Charging Instructions Plug the power adapter jack Plug the power cord into into the right side of the the power adapter. DuraCam/ToughCam device. ENSURE THE IMAGER IS NEAR ROOM TEMPERATURE BEFORE CHARGING THE DEVICE. DO NOT CHARGE IN EXTREMELY HOT OR COLD AREAS. - Page 9 110/120V electrical outlet. CHARGE THE BATTERY FOR A MINIMUM OF 3 HOURS BEFORE USING. ICI DOES NOT RECOMMEND CHARGING THE DEVICE WHILE IT IS ON A TRIPOD. LAY DEVICE FACE DOWN ON A FLAT AND STABLE DESK OR TABLE WHILE CHARGING.
- Page 10 Website: www.infraredcameras.com You may reach a representative by phone or email Mon – Fri 8:00AM - 5:00PM CST. ICI manufactures complete systems and software. We can provide complete engineering, software, and OEM solutions. Our Fortune 500 clients rely on us for infrared equipment and thermography training (which we offer through the Infrared Training Institute).
Need help?
Do you have a question about the DURACAM Series and is the answer not in the manual?
Questions and answers