Standard Operation - Heating Mode - LG PQRCHCSA Owners & Installation Manual

Standard Operation - Heating Mode

It supplies warm wind to the indoor
FAN
SPEED
TEMP
What is the three-minute delay function?
It will take time for the product to blow warm air. The delay is to protect the compressor.
The room will be heated with warm air after three minutes when the compressor begins
operation.
n The cooling-only model will not do heating function.
1
°F
2
OPER
MODE
3
4
If you want to set the heating operation,
press the button. And press the
button.
- is displayed on the display screen.
Set the desired room temperature higher
than the current room temperature.
A press of the button will increase the
desired temperature by 1 °F
TEMP
A press of the button will decrease the
desired temperature by 1 °F
- Desired temp range : 54 °F ~ 86 °F (12.2 ℃ ~
30 ℃ )
- The desired temp range may vary depending
on the temp range set in the product.
- If the desired temperature is set lower than
the current room temperature, the heating
function will not begin.
If you press the OPER MODE button during
the operation, the operation mode will be
changed in the order of heating,
Cooling, dry and fan operation.
If you press the button, the heating
operation will stop.
Owner's & Installation Manual 11
Owner's instruction
OPER
MODE