Table of Contents
Advertisement
Owner's instruction
Owner's instruction
Standard Operation - Cooling Mode
It cools the room by comfortable and clean wind.
FAN
SPEED
TEMP
10 Wired Remote Controller
1
°F
2
OPER
MODE
3
4
Cooling operation will begin if you press
the
button.
-
is displayed on the display screen.
Press the TEMP button and set the desired
room temperature lower than the current
room temperature.
A press of the button will increase the
desired temperature by 1 °F
TEMP
A press of the button will decrease the
desired temperature by 1 °F .
- Desired temp range : 54 °F ~ 86 °F (12.2 ℃ ~
30 ℃ )
- The desired temp range may vary depending
on the temp range set in the product.
- If the desired temperature is set higher than
the current room temperature, the cooling
function will not begin and just the blowing
operation will continue.
If you press the OPER MODE button during
the operation, the operation mode will be
changed in the order of heating, Cooling, dry
and fan operation.
If you press the
button, the cooling
operation will stop.
Advertisement
Table of Contents
