Standard Operation - Heating Mode - LG UB-H368GSS0 Owner's Manual

Standard Operation - Heating Mode

It supplies warm wind to the indoor
FAN
SPEED
TEMP
NOTE
!
What is the three-minute delay function?
It will take time for the product to blow warm air. The delay is to protect the compressor.
The room will be heated with warm air after three minutes when the compressor begins oper-
ation.
* The cooling-only model will not do heating function.
1
2
OPER
MODE
3
4
OWNER'S INSTRUCTION
If you want to set the heating operation,
press the button. And press the
button.
Set the desired room temperature higher
than the current room temperature.
A click of the button will increase the
desired temperature by 1 °C or 2 °F.
TEMP
A click of the button will decrease the
desired temperature by 1 °C or 2 °F.
- Setting temp range : 16 °C~30 °C (60 °F~86 °F)
- If the desired temperature is set lower
than the current room temperature, the
heating function will not begin.
If you press the mode button during the
operation, the operation mode will be
changed in the order of cooling,
dry(dehumidification),heating,auto-operation
and fan operation.
If you press the button, the cooling
operation will stop.
11
OPER
MODE