Presetting Radio Stations; Playing Preset Radio Stations - Sony CHC-P33D Operating Instructions Manual

One Touch Play feature
Press TUNER/BAND when the power is
off.
You can listen to the last received station
without pressing any other buttons.
Automatic Source Selection
If you press TUNER/BAND while you are
listening to other sound source, the tuner is
selected and the last received station plays
automatically.
Presetting Radio
Stations
You can store radio frequencies in the
tuner's memory to tune in your favourite
stations quickly. You can preset up to 20
FM stations, 10 MW stations and 10 SW
stations in any order (20 FM and 10 AM
stations for Latin America and Australia).
Use the buttons on the unit to do this
operation.
2
STEREO/MONO
BAND
1
Press TUNER/BAND (or BAND on the
remote) repeatedly until the band you
want appears in the display.
Latin-American and Australian
models:
FM
Other models:
FM
2
Press TUNING MODE repeatedly until
"AUTO" appears in the display.
3
Turn the jog dial to tune in the station
you want to store.
4
Press TUNER MEMORY.
"MEMORY" and the preset channel
number appear in the display.
Preset channel number
1
5
Turn the jog dial to display the preset
6 channel number you have decided on,
while "MEMORY" is lit.
3,5
4
6
Press ENTER/NEXT.
The station is stored at the preset
channel number you have decided on.
7
Repeat steps 3 to 6 for each station you
want to store.
To erase a stored station
Store a new station at a previously used
preset channel number. It will erase the old
station and replace it with the new station.
If you have trouble storing a station
Make sure "MEMORY" is lit in the display.
If not, press TUNER MEMORY again so
that "MEMORY" appears (for about eight
seconds) in the display, and then proceed
with steps 5 and 6.
Playing Preset Radio
Stations
Once you have preset the stations, use the
AM
jog dial to quickly tune in your favourite
stations.
MW SW
1
2
3
2
STEREO/MONO
PRESET + / -
BAND
Press TUNER/BAND (or BAND on the
remote) repeatedly to select the desired
band.
Latin-American and Australian
models:
FM AM
Other models:
FM MW SW
Press TUNING MODE repeatedly until
"PRESET" appears in the display.
Turn the jog dial (or press PRESET
(+/–) on the remote) to tune in a preset
station.
The station frequency appears and the
station begins broadcasting.
Chapter 3: the Radio
1
3
EN
11