Sony CHC-P33D Operating Instructions Manual page 16

continued
Dubbing Another Tape
Manually
When you want to dub only part of the
tape, dub manually at normal speed. Use
TYPE I (normal) or TYPE II (CrO
recording.
SYSTEM
POWERnON
2
7
1
Press § EJECT DECK A and DECK B
and insert a recorded tape in deck A
EN
with the side you want to play facing
16
forward.
Also, insert a blank tape into deck B
with the side you want to record on
facing forward.
Recording and playback will start from
the front side of the tape, unless you
have changed the playing direction
before recording.
Make sure the tabs on the cassette for
deck B have not been removed.
2
Press FUNCTION repeatedly until
"TAPE" appears in the display.
3
Select dual or single-sided recording.
To record
One side
Both sides*
* Recording always stops at the end of the
reverse side. Be sure to start from the
front side.
4
Press r REC.
Deck B stands by for recording.
5
Press P to release recording pause.
Recording starts.
6
Press DECK SELECT so that the "A"
lights up.
7
Press (.
The tape on deck A starts playing.
To stop recording
Press p. To stop the other deck, press
DECK SELECT and then p.
Chapter 4: the Tape Player
Notes
• Do not switch to the other functions. If
you do so, the recording stops.
• You cannot dub the tape recorded with
the DOLBY NR B effect onto another tape
with the DOLBY NR B effect off.
• If you want to dub the tape not recorded
with the DOLBY NR B effect onto another
tape with the DOLBY NR B effect on,
) tape for
2
press DOLBY NR so that "DOLBY NR B"
appears in the display after step 3.
1
3
1
6
4
5
Press DIRECTION
MODE to select
A
ß or RELAY