Setting Up The Instant (S-Iws) Connection - Sony Giga Juke NAS-SC55PKE Quick Connection And Setup Manual

Setting up the Instant (S-IWS) connection

To listen to audio data on your "GIGA JUKE"
Music Server with the "GIGA JUKE" Wireless
Player, you need to connect these devices through
a wireless station.
With the NAS-SC55PKE, you can connect the
devices over a wireless network through Instant
(S-IWS*) connection, allowing you to play audio
data stored on the "GIGA JUKE" Music Server
through the speakers of the "GIGA JUKE"
Wireless Player placed in a different room.
* S-IWS (Sony Instant Wireless Audio Setup) is a
function that can connect and set up a wireless network
automatically by turning on the power of the devices.
This operation is performed on the "GIGA
JUKE" Music Server, the "GIGA JUKE" Wireless
Player and the wireless station.
Wireless
adaptor
"GIGA JUKE" Music Server
Note
You may encounter setup difficulties if the "GIGA
JUKE" Music Server, the "GIGA JUKE" Wireless Player
and the wireless station are located too far from each
other. If you do, place the devices closer to each other.
1
Turn on the wireless station.
Wireless station
"GIGA JUKE" Wireless Player
RESET
button
To a wall outlet
 Attach the supplied stand to the
wireless station.
 Confirm that the operation mode
switch (located at the rear of the
wireless station) is set to "AUTO".
 Use the 5V AC power adaptor (supplied
with the wireless station) to connect
the wireless station to a wall outlet.
 Confirm that the POWER indicator is lit.
Wait until the INSTANT indicator lights
up and the AOSS indicator turns off.
(This may take several minutes.)
If this does not occur on the wireless
station, press the RESET button. Use
something with a pointed tip, such as a
small pin, to press the RESET button.
2
Connect the "GIGA JUKE" Music
Server and the wireless station.

To a wall
outlet
  (power)
 Connect the supplied wireless adaptor
to the USB port on the "GIGA JUKE"
Music Server using the supplied USB
extension cable.

To the USB port

GB