Sony Giga Juke NAS-SC55PKE Quick Connection And Setup Manual page 8

 Connect the power cord of the "GIGA
JUKE" Music Server to a wall outlet.
The "GIGA JUKE" Music Server
automatically turns on, makes the initial
settings (the display shows "Checking
System Please Wait"), and then turns off.
The initial settings may take a few
minutes depending on the condition of
the "GIGA JUKE" Music Server.
Do not disconnect the power cord while
the initial setup is in progress. Doing
so may cause the "GIGA JUKE" Music
Server to malfunction.
 Press  (power) to turn on the "GIGA
JUKE" Music Server.
The "GIGA JUKE" Music Server starts
connecting to the wireless station.
When the connection has completed,
this is indicated by a pop-up window.
Language displayed on the screen depends on the
language that is set on the "GIGA JUKE" Music Server. For
details on the display language setting, see page 11.
3
Connect the "GIGA JUKE" Wireless
Player and the wireless station.
To the DC IN 12V jack
 Use the 12V AC power adaptor
(supplied with the "GIGA JUKE" Wireless
Player) to connect the "GIGA JUKE"
Wireless Player to a wall outlet.

GB
  (power)

To a wall outlet
 Press  (power) to turn on the "GIGA
JUKE" Wireless Player.
The "GIGA JUKE" Wireless Player starts
connecting to the wireless station.
Language displayed on the screen depends on the language
that is set on the "GIGA JUKE" Wireless Player. For details on
the display language setting, see page 11.
When "Instant (S-IWS) setting with
wireless station is completed. " appears,
press / to select [OK] and press
ENTER. The name of the "GIGA JUKE"
Music Server (e.g., "NAS-S55HDE")
appears in the server selection display.
If the name of the "GIGA JUKE" Music Server does not
appear, press  to select [Update info] and press ENTER.
Connection between the "GIGA JUKE"
Music Server and the "GIGA JUKE"
Wireless Player is completed.
Should you experience any problems, see
"Troubleshooting" on page 19.