Figure 4 3: Horizontal Adjustments (One); Figure 4 4: Horizontal Adjustments (Two) - Tektronix TAS 465 Service Manual

Brief Performance Checks
4 10
Dots Eight Divisions
Apart, Centered
Horizontally

Figure 4 3: Horizontal Adjustments (One)

5. Select Done when you have the appropriate display.
6. Again, use a combination of the TOGGLE button and the General Pur
pose Knob to position the two dots eight divisions apart, centered
horizontally (see Figure 4 3).
7. Select Done when you have the appropriate display.
8. One dot is now displayed.
9. Use a combination of the TOGGLE button and the General Purpose
Knob to horizontally center the single dot at the center of the screen
(see Figure 4 4).
Continue to press the TOGGLE button and adjusting the dot to center
screen with the General Purpose Knob until the dot stays horizontally
centered while pressing the TOGGLE button.
Center Dot
Horizontally

Figure 4 4: Horizontal Adjustments (Two)

Gain and Position
Adjustment
Toggle Between
Gain and Position
Adjustment
Position
Adjustment
Toggle Dot Position
Performance Verification