Installing Raid Management Software; Rebuilding Driver Module For System Update; Trouble Shooting - HighPoint SSD7103 Installation Manual

SSD7103 Linux Ubuntu 18.04.4 Server Installation Guide
installed, it will be 0. In the following sections, we will use x to represent this number.
Using the following command to show driver status:
# cat /proc/scsi/hptnvme /x
This command will show the driver version number, physical device list and logical device
list.

4 Installing RAID Management Software

HighPoint RAID Management Software is used to configure and keep track of your hard
disks and RAID arrays attached to
software is optional but recommended.
Please refer to HighPoint RAID Management Software documents for more information.

5 Rebuilding Driver Module for System Update

When the system updates the kernel packages, the driver module hptnvme.ko should be
built and installed manually before reboot.
Please refer to the REAME file distributed with HighPoint
on how to build and install the driver module.

6 Trouble Shooting

If you forget to install the open linux driver before updating the kernel, the system
crash cannot enter. Please follow the steps below.
a. Press and hold the keyboard up and down button when booting, until the following
interface appears.
Choose " Advanced options for Ubuntu " and press Enter
b. Select the default kernel (4.15.0-67-generic)and enter the system.
c. Install Linux open source driver.
SSD7103 controller. Installation of the management
open source package
SSD7103
- 9 -