Monitoring The Driver - HighPoint SSD7103 Installation Manual

SSD7103 Linux Ubuntu 18.04.4 Server Installation Guide
e. Press ALT-F1 to continue system installation.
When the installation prompts "Finish the installation".
f.
Press ALT-F2 and execute following command to install driver to the installed Linux
Ubuntu Server on the array of SSD7103.
# sh /tmp/hptdd/postinst.sh
g. Press ALT-F1 and press "Continue" to finish the installation.
h. Open source driver needs to be installed after system installation.
http://highpoint-tech.com/USA_new/series-ssd7103-download.htm
Run the .bin file to install the driver package.
# sh hptnvme_g5_linux_src_vxx.x.x_xx_xx_xx.bin
i. Follow the prompts to complete the driver installation.
j. After the installation is complete, you can perform system update operations.

3 Monitoring the Driver

Once the driver is running, you can monitor it through the Linux proc file system support.
There is a special file under /proc/scsi/hptnvme /. Through this file you can view driver
status and send control commands to the driver.
Note
The file name is the SCSI host number allocated by OS. If you have no other SCSI cards
← Install SSD7103 driver.
- 8 -