Advertisement
1-4. Turning the power on
1. Turn on the main power of the monitor.
Main power switch
• When switching the main power switch on and off, always wait for an
interval of at least 5 seconds. Rapid switching may result in malfunc-
tion.
2. Press the monitor's power button.
The power LED will light up orange.
3. Turn on the computer.
Press power button.
• When a signal is input from the computer, the power LED lights
up green, and the screen is displayed. (After power is turned on, it
may take a little time until the screen is displayed.)
Note:
• If using the monitor for the first time or after having changed the
system settings during use, perform an automatic screen adjust-
ment.
• Depending on the type of computer or OS, you may need to
install the monitor set-up information on your system.
• When connecting to a notebook, if the notebook computer's
screen is set to display at the same time, the MS-DOS screen
may not be able to display properly. In this case, change the set-
tings so that only on the monitor.
1-5. Turning the power off
1. Turn the computer off.
2. Press the monitor's POWER button.
The Power LED will disappear.
Turn the
computer off.
OFF
If the monitor will not be used for a long time, turn off the main power
switch of the monitor, and remove the power plug from the outlet.
Turn on the
computer power
supply.
ON
Press power button.
LL-T17A4-H/B CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTIONS
2 – 2
Advertisement
