Advertisement
CHAPTER 2. CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTIONS
1. CONNECTION
Caution:
• When connecting, ensure that both the monitor and computer are switched off.
• Be careful not to overly bend the cable or add extension cords as this could lead to a malfunction.
1-1. Connecting the monitor to a computer
Analog signal cab le
• Paying attention to connector direction, firmly insert the signal cable
vertically into the connector, and then tighten the screws at both
sides.
If connecting to a D-sub 15 pin 2 row Apple Power Macintosh, attach a
Macintosh conversion adapter (commercially available) to the analog
signal cable.
Note: If connecting to the Sun Ultra series, a conversion adapter (com-
mercially available) may be required.
Analog RGB terminal
(Mini D-sub 15 pin, 3 row)
Macintosh conversion adapter
LL-T17A4-H/B CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTIONS
Connect the accessory audio cable
When the accessory audio cable is connected to the audio output termi-
nal of the computer, the sound of the connected computer is output
from the monitor speakers. You can also use the headphone jack of the
display.
1-2. Connection of headphones
(commercially available)
Headphones (commercially available) can be connected.
Headphone ter minal
Note: When the headphones are connected, no sound can be heard
from the monitor speakers.
1-3. Connecting the monitor to a power source.
Power terminal
Power cord
2 – 1
Audio input terminal
Audio output terminal
Audio cable
Headphones
AC outlet
Advertisement
