One Lincoln Way
St. Louis, MO 63120-1578
Phone +1.314.679.4200
Fax +1.800.424.5359
NOV - 2004
To order call 1-800-548-1191 or visit www.partdeal.com - info@partdeal.com
MODELS 282050, 282716 & 283513
OWNER/OPERATOR MANUAL
Airmotor effective dia. in.
Airinlet
Material outlet
Liquid to Air Pressure Ratio
Delivery output, cubic inches per minute
Delivery in cubic inches per cycle
Minimum air pressure
Maximum air pressure
Max output pressure
Noise level @ 120 psig air
DESCRIPTION
These pumps are air operated single act-
ing grease pumps designed to pump low
and medium viscosity materials (grease)
from drums and pails.
OWNER/OPERATOR
RESPONSIBILITY
It is the owners/operators responsibility
to properly use and maintain this equip-
ment.
The instructions and warnings contained
in this manual shall be read and under-
stood by the owner/operator prior to op-
erating this equipment.
If an owner/operator does not understand
English, the contents of this manual shall
be explained in the owners/ operators na-
tive language to assure the owner/opera-
tor comprehends.
It is the owners/operators responsibility to
maintain the legibility of all warning and
instruction labels.
Form 403527
AIR OPERATED CHASSIS PUMP
SPECIFICATIONS
The owner/operator shall retain this
manual for future reference to impor-
tant warnings, operating and mainte-
nance instructions.
SAFETY INFORMATION
Read and understand all warnings, cau-
tions and instruction before operating
this equipment. Extreme caution should
be used when operating this equipment
as personal injury and/ or property dam-
age can result from equipment misuse.
Adequate personal protection is recom-
mended to prevent splashing of material
on the skin or in the eyes. ALWAYS dis-
connect air coupler from pump when the
pump is not being used.
© Copyright 2004
Printed in USA
Web site:
www.lincolnindustrial.com
SERIES "A"
2.5
1/4" NPTF
1/4" NPTF
50:1
55
.27
30 p.s.i.
150 p.s.i.
7500 p.s.i.
<85 dBA
- A5
Section
- 70C
Page
Need help?
Do you have a question about the 282050 and is the answer not in the manual?
Questions and answers