Advertisement
The memory socket is mounted flush with the
RAID controller. The iTBBU03 is parallel to the
RAID controller when properly installed.
Figure 2 Installing the iTBBU03 in the MiniDIMM
Socket on the MegaRAID SAS 8888ELP
RAID Controller
Step 6
Press the iTBBU03 firmly into the memory
socket.
As you press the iTBBU03 into the socket, it
clicks into place when it is properly seated in the
socket. The arms on the sides of the socket
rotate into the notches on the sides of the
iTBBU03 to hold it securely in place.
Step 7
Install the MegaRAID SAS 8888ELP RAID
controller in the computer, as shown in
Press down gently, but firmly, to ensure that the
RAID controller is properly seated in the slot. The
bottom edge of the RAID controller must be flush
with the slot.
Caution:
Never apply pressure to the LSIiTBBU03 or to the
DIMM when inserting the SAS 8888ELP RAID
controller. Instead, press down only on the top
edge of the RAID controller, as shown in
®
Document P/N: 80-00165-01 Rev. A
iTBBU03 P/N: 01126
Version 1.0, November 2006
Find a list of LSI Logic Corporation's U.S. distributors, international distributors,
sales offices, and design resource centers on the LSI Logic web site at:
http://www.lsilogic.com/contacts/index.html.
Figure 3 Installing the MegaRAID SAS 8888ELP
Step 8
Step 9
Step 10
T E C H N I C A L S U P P O R T
For assistance in installing the iTBBU03, contact LSI Logic
Technical Support:
Figure
3.
E-mail:
support@lsil.com
eurosupport@lsil.com (Europe)
Phone Support:
1-800-633-4545 (North America)
+44 1344 413 441 (Europe)
Web Site:
Figure
3.
http://www.lsilogic.com/support/support_form.html
http://www.lsilogic.com/support/phone.html
LSI Logic, the LSI Logic logo design, and MegaRAID are trademarks or registered
trademarks of LSI Logic Corporation. All other brand and product names may be
trademarks of their respective companies.
Copyright © 2006 by LSI Logic Corporation. All rights reserved.
LSI Logic Corporation reserves the right to make changes to any products and ser-
vices herein at any time without notice. LSI Logic does not assume any responsi-
bility or liability arising out of the application or use of any product or service
described herein, except as expressly agreed to in writing by LSI Logic; nor does
the purchase, lease, or use of a product or service from LSI Logic convey a license
under any patent rights, copyrights, trademark rights, or any other of the intellec-
tual property rights of LSI Logic or of third parties.
RAID Controller
Attach the RAID controller to the computer
chassis with the bracket screw.
Attach the cables, as needed, to the connectors
on the RAID controller.
Replace the computer cover, and reattach the
power cord(s).
Advertisement
