Starting The Siteprotector Console And Logging On - IBM SP3001 Hardware Configuration Manual

8. Read and accept the End User License Agreement.
9. Follow the installation prompts and enter any required information. The Console and Event Viewer
are installed on the computer.

Starting the SiteProtector Console and logging on

Procedure
1. On your computer, open the SiteProtector Console.
2. Right-click the My Sites node in the left pane.
3. Select New > Site.
4. Log in using the SiteProtector SP3001 appliance's IP address.
5. Do the following:
In this Field...
User Name
Password
Note: Change this password as soon as possible. See "Securing SP3001 appliance passwords" on page
18.
6. Click OK.
16
SiteProtector System: SP3001 Hardware Configuration
Type the following...
Administrator
ISSADMIN