IBM Security SiteProtector System SP3001 Getting Started
This document guides you through the process of connecting and performing the initial configuration of
Front panel features
v A: LCD panel - use for initial network configuration, restarting or shutting down the appliance,
viewing the serial number of the appliance, and setting the appliance PIN.
v B: Arrow and enter keys - use to select menu choices and interact with the appliance using the LCD
v C: Serial console RJ-45 port - use for optional terminal-based setup, diagnostic testing, and recovery.
v D: USB ports (3) - for keyboard, mouse, and external DVD-ROM to retrieve data and install firmware.
v E: Indicators - to display status for alerts (amber), system ID (blue), and power (green) respectively.
v F: Power switch - to power the unit on or off.
v G: Management interfaces (2 GbE NICs) - use Management port 0 to manage the SiteProtector
appliance; management port 1 is unused. The Management port handles all network communication.
v H: VGA video port - for external monitor.
Rear panel features
v A: Cooling fans (3)
v B: Cooling fan status indicators (3)
v C: Power connections (2)
v D: Power supplies (4)
© Copyright IBM Corp. 2009, 2014
System SP3001 appliance.