IBM SP3001 Hardware Configuration Manual page 15

Setting
U
Management port subnet mask
h
Your setting:
h
Management port default gateway
h
Your setting:
h
Host name
h
Your setting:
h
DNS server name
h
Your setting:
h
Cables required checklist
You must use certain cables to connect the SiteProtector SP3001 appliance to the network and to a power
source. These cables are included with the SiteProtector SP3001 appliance:
Item
U
Ethernet cable
h
Two (2) Power cords (included with the SiteProtector SP3001 appliance hardware)
h
Description
The subnet mask value for the network connected to
the management port.
Example: 255.255.255.0
The IP address for the management gateway.
Example:192.168.1.1
The computer name for the SiteProtector SP3001
appliance.
Example: SP3001
The IP address of the domain name server that the
SiteProtector SP3001 appliance will use.
Example: 192.168.1.1
Chapter 2. Before You Begin
9