Siemens Climatix HMI-DM Basic Documentation page 20

Entering password by
key ROLL
20/36
Siemens
Building technologies
4. If the password is entered incorrectly, it will redirect to the home page, and
the user level will be "Not login".
5. Press key INFO on this page to automatically check if the target page has
been defined on page 65410 and if the user level has enough privileges. If
yes, it will redirect to the target page.
1. Press and hold key ROLL to go to the password entering page. Choose a
digit by turning the knob of key ROLL.
2. Press key ROLL to confirm the input, and the input value will become an
asterisk "*".
Press key ESC to exit from the current page. Press and hold key ROLL to re-
enter the password.
3. If the password is entered correctly, the page where users activate the
password entering page will be displayed, and the corresponding user
level will be shown on the upper-left corner.
4. If the password is entered incorrectly, it will display the following
information:
Climatix HMI-DM
Functions and operations
CB1P3916en02
2015-07-02