Siemens Climatix HMI-DM Basic Documentation page 21

Password
configuration
For example
Siemens
Building Technologies
5. Then re-enter the password. Press key INFO on this page and it will
redirect to the home page.
Application engineer can configure which kind of password can be changed by
programming in SCOPE.
If the application engineer configured that only the password of end user could be
changed, Change Service Password and Change Factory Password template
pages will not be displayed and entered. Press and hold key ROLL at any page
(except the error report page), and the log in/off page will be displayed.
If the application engineer configured that both the password of end user and
service user level could be changed, only Change Factory Password template
page will not be displayed and entered. Press and hold key ROLL at any page
(except the error report page), and the log in/off page will be displayed.
For detail information about how to configure the password, refer to Climatix
SCOPE online help.
To change the password of user level, select Change User Password and press
key ROLL, and the following page will be displayed.
Climatix HMI-DM
Functions and operations
21/36
CB1P3916en02
2015-07-02