3
WORK
3.1
Raising the motorcycle with a lift stand
Note
Danger of damage The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
3.2
Removing the motorcycle from the lift stand
Note
Danger of damage The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
3.3
Installing the front wheel
Warning
Danger of accidents Reduced braking efficiency due to oil or grease on the brake discs.
–
Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
–
Raise the motorcycle at the frame underneath the engine.
Lift stand (59229055000)
The tires should no longer be in contact with the ground.
–
Secure the motorcycle against falling over.
601945-01
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, insert plug-in stand
the left side of the vehicle.
Info
Remove the plug-in stand before riding.
601942-10
x
–
Check the wheel bearing for damage and wear.
»
If the wheel bearing is broken or worn:
–
Change the wheel bearing.
–
Clean and grease wheel spindle
Long-life grease (
–
Lift the front wheel into the fork, position it, and insert wheel spindle
–
Tighten screws
Guideline
601957-11
Screw, fork stub
–
Mount and tighten screw
Guideline
Screw, front wheel spindle
–
Remove the motorcycle from the lift stand. (
601956-11
x
.
1
p. 10)
.
2
.
3
into the plug-in stand bracket on
1
1
M6
10 Nm (7.4 lbf ft)
M10
40 Nm
(29.5 lbf ft)
p. 4)
4
.