Advertisement
(1) Insert the software CD-ROM that came packaged with your
RDC-i700 into your computer's CD-ROM drive.
(2) Turn the camera mode dial to PC and press the ON/OFF
button.
(3) The Found New Hardware Wizard should appear. When it
does, select "Install from a list or specific location
(Advanced)" and click Next. (See Figure 1.)
(4) In the screen that follows, make sure "Search removable
media" is selected, then click Next to start the installation.
(5) Windows will display a warning message, but this message
can safely be ignored. Click Continue Anyway to continue.
(See Figure 2.)
(6) Click Finish when the wizard notifies you that the installation
has finished.
5. Installing the Explorer Plug-in
(1) Browse to the folder where you saved the downloaded files.
Locate the Disk1 folder and open it.
(2) Click on the setup.exe icon to start the installation.
(3) Choose your preferred language from the list and click OK.
(4) Click Next at the Welcome screen.
(5) Click Next at the Choose Destination Location screen to accept the default or Browse to select a
different location.
(6) Select Typical to install the standard components or Custom to customize your installation, then click
Next. (Note: If you choose the Custom option, the Explorer Plug-in and Virtual Server Process options
must be selected for the camera to work properly.)
(7) Specify a program folder (if desired) and click Next.
(8) Click Finish to finish the installation.
6. Using the Explorer plug-in
(1) Connect the PC to the camera using the USB
cable provided. Turn the camera mode dial to PC
and press the ON/OFF button.
(2) Launch Explorer.
(3) Enter the URL displayed on the RDC-i700's LCD
display into Explorer's Address field, then press
Enter.
(4) Select the options that best suit your needs from
the on-screen display. (See Figure 3.)
Figure 1: Found New Hardware wizard
Figure 2: Ignore this warning
Figure 3: RDC-i700 main menu
RDC-i700 Windows XP Installation Guide - 5
Advertisement
