Configuration And Test Call; Checking Configuration; Making A Test Call - Plantronics Savi WT100/T User Manual

4 Configuration and test call

4.1 Checking configuration

1
Set volume on desk phone to mid-range.
2
Remove handset from desk phone cradle.
3 With your headset on, press the call control button on
the headset.
4
Listen for a normal dial tone. If you hear a dial tone and the
dial tone sounds normal, continue with Step 4.2
call.
5 If you do not hear a dial tone or the dial tone is distorted,
adjust the configuration switch until the dial tone sounds
normal.
Note Multiple settings might work with your phone; however,
only one is the optimal position

4.2 Making a test call

1
Remove handset from desk phone cradle.
2 With your headset on, press the call control button on
the headset.
3
Dial using your desk phone.
4
Adjust the master speaking volume on base to the
best setting for your listener. A setting that is too high can
produce an uncomfortable echo for you and a distorted sound
for your listener. A setting of 3 or 4 is ideal.
Plantronics Savi User Guide
Making a test
Configuration
switch
5
Adjust the master listening volume on base. A setting of 2
or 3 is ideal.
6 You can also fine-tune the listening volume on the
headset by pushing the call control button up to increase
the volume and pushing down to decrease the volume.
Note Do not press the call control button in when adjusting the
volume; otherwise, the call can be ended accidentally.
7 to end the test call, press the call control button on the
headset.
8 Replace the handset in the desk phone cradle.
Master speak- Master
ing volume listening
volume
9