Preset Programs; Troubleshooting - Wilfa IMMIX BL7S-PB1800 Instruction Manual

EN

PRESET PROGRAMS

Function
Ice crush
Smoothie Full jug
Smoothie Half jug
Auto clean

TROUBLESHOOTING

Problem
The blender will
not start.
Blender stops
Content does not
blend properly
INSTRUCTION MANUAL · IMMIX
Program
Put ice cubes into the jug, not more
than 180g ice, and press start. If the
ice sticks, add some water.
Use this program when you want
a full jug with smoothie. Do not fill
over the max line on the jug.
When you are making a smaller
batch with smoothie. For half a jug,
fill up to 0.9L.
Put 1.8L water into the jug and run
this program to clean the jug.
Possible reason
The switch is not set to 0
Is the jug properly placed?
The blender has run more
than 2 minutes.
Not enough fluid
8
Operation cycle
120 seconds
92 Seconds
45 seconds
Solution
Turn the switch to 0. The icons
should stop blinking, and you
can choose a pre set program
or manual speed
Place the jug correctly onto
the base
Let the motor cool down
Use the temper, or consider
adding more fluid in the jar to
help circulation