Nikon Coolpix L10 Repair Manual page 24

Hide thumbs Also See for Coolpix L10:

Table of Contents

5. Dark DPC

The position of "Dark dead pixel" under bright environment is calculated, and written in "Flash Rom".

Device

・AC adapter (EH-65A) or fresh battery, ND filter (1.0), Color viewer, Luminance meter (BM-3000), Color

meter

[Preparation]

・ Set the ND filter between the camera and color viewer.

・ By using the color viewer (Color temperature: 4800K±200　K=1.3　LV=10.0±0.1), COLOR METER, and

BM-3000 (luminance meter), measure the values.

(If the luminance does not fall within "LV10.0±0.1", adjust it by roatating the adjustment knob of the color

viewer.）

ND (1.0) filter

Procedure

・ Turn camera OFF. Then, press "playback" button a few seconds, and

start the program.

・ Press "playback" button to switch the screen.

・ Press "Select" button, and choose "Dark DPC".

・ Press "Playback" button.

・ Press the left or right portion of "Select" button,

and change the value of "000001" to "000000".

　Luminance　K=1.3

　Color temperature

Color viewer

Change to "000000"

only for "Disable".

- A13 ･Ｌ１０ -

INC

VAA76013-R.3709.A

LV=10.0±0.1

4800K±200

Table of Contents

Vaa76013