Nikon Coolpix L10 Repair Manual page 23

4. Light/S.S
Shoot with the shutter being closed, and check "Light pixel".
The shutter is open for 30 minutes, and the position of "Slow shutter dead pixel" is calculated and written in
"Flash Rom".
Device
・ AC adapter (EH-65A)
（The measurement takes as long as 30 minutes, so use the AC.)
Procedure
・ Turn camera OFF. Then, press "playback" button a few seconds, and
start the program.
・ Press "playback" button to switch the screen.
・ Press "Select" button, and choose "Light/S.S".
・ Press "Playback" button.
・ Press the left or right portion of "Select" button,
and change the value of "000001" to "000000".
・ Press "OK" button twice.
・ Select and press "OK" button.
・ Light/S.S adjustment starts.
・ The result appears in the lower right portion of
the screen.
・ Pressing "Playback" button goes back to the
screen for adjustment items.
"Light pixel" ends.
Standard: DP NUM 5000 or less
Change to "000000"
only for "Disable".
"Slow shutter" starts.
Countdown for 5 minutes.
- A12 ･Ｌ１０ -
INC
VAA76013-R.3709.A
Standard: DP NUM 50000 or less